Bobcat

The S630 features a rated operating capacity of 2,180 pounds, operating weight of 7,707 pounds and standard auxiliary hydraulic flow of 23 GPM at 3,500 PSI.


Mustang

The 2700V has an 84 hp turbocharged diesel engine, vertical-lift boom, rated operating capacity of 2,700 pounds, extra-long wheelbase and thick steel plating.


Gehl

The RS10-55 and RS12-42 feature maximum lift heights of 55 and 42 feet, booms with a welded box-section design and rear axle stabilizer system.


JCB

The Loadall 515-40 has a 55-inch turning radius, 3,300-pound maximum lift capacity, four-wheel drive, two-speed hydrostatic transmission and canopy or cab.


Manitou

The MLT 735 offers a 123 hp Perkins engine, three steering modes, torque converter, load-sensing hydraulic system and maximum lift height of 22.5 feet.


Gillison’s Variety Fabrication

GVF Rough Terrain Forklifts are rugged, maneuverable lifts made for farm and orchard applications. Available in three models, with two or four-wheel drive.


Manitou

M Series models have a 94 hp Perkins or Caterpillar engine, two or four-wheel drive, frame leveling option and lift capacities of 6,000, 8,000 and 10,000 pounds.


Sunbelt Industrial Trucks

Navigator models include a 4,000-pound-capacity, two-wheel drive unit and all-wheel drive units with capacities of 5,000, 5,500 and 6,500 pounds.


Bobcat

Rock buckets come in 62, 68, 74 and 82-inch widths and have tines that are fully gusseted on each side and interconnected to provide strength and durability.


Danuser

The EP heavy-duty auger series features a planetary design with fewer internal components, forged planetary housing and 2-inch hexagon output shaft.


FFC

The FFC Tree Spade for skid steer loaders has no moving parts, requires little maintenance and is available in 36, 40, 44 and 48-inch ball sizes.


General Equip. Co.

The 671 DIG-R-TACH series uses a 2-inch hexagon auger drive system. The Series 16 is for smaller hydraulic systems, and the Series 24 is for larger systems.


Grouser Products

The Grouser Bar Track features an open bar design that utilizes the tire to provide maximum traction and flotation in soft, muddy and loose soil conditions.


Kencove Farm Fence

Shaver post drivers can be mounted to a tractor or skid steer. A safety arm holds posts in place and the compact size allows for easier storage and transport.


Land Pride

The SC26 rotary cutter offers a smooth top design, 60-inch cutting width, cutting heights of 1.5 to 18 inches and high, medium or low-volume motors.


MDS

Powder-coated, clamp-on bucket forks come in capacities of 800, 1,000, 2,000, 3,000, 4,000 and 6,000 pounds, with a capped main upright to keep out rainwater.


Phil Brown Welding

Box rotators for forklifts come in 130 and 180-degree models. The optional automatic clamp uses only one lever for clamping and rotating.


SweepEx

The Mega 600 is built with no moving parts and a 60-inch long main frame. Made of industrial steel with powder-coat finish and polypropylene brush sections.


TrunkPump

The TP-HYD dewatering pump is powered by a skid steer’s remote hydraulics and comes with hydraulic hoses, flush face fittings and protective roll cage.


Wifo

Wifo 2.5 and 3.5-ton box rotators for forklifts and loaders turn 180 degrees to the left and come with or without an integrated side shift. With heavy-duty rotating shaft.