8 Effective DIY Pool Cleaner and Maintenance Tips for a Sparkling Pool

Maintaining a clean and clear pool doesn’t always require expensive solutions. With these 8 DIY pool cleaner and maintenance tips, you can ensure a pristine swimming experience without breaking the bank.

Part 1. Simple Cleaning Substitutes for Pool Care

1. Utilize 3-Inch Chlorine Tablets

pool cleaning tips - Utilize 3-Inch Chlorine Tablets

One of the most important aspects of pool maintenance is maintaining proper chlorine levels. Using PoolClever’s 3-inch chlorine tablets can help you keep your pool water sanitized and free from harmful bacteria and contaminants.

These 3-inch chlorine tablets contain 99% cyanuric chloride (trichloro) and 90% available chlorine content. Powerful active ingredients, resistant to solar radiation, long-lasting and slow-dissolving formula to ensure clear and fresh pool water.

Add 1 chlorine tablet per 10,000 gallons of water. For large pools, add 2 tablets for every 15,000-20,000 gallons of water, or 3 tablets for every 25,000-30,000 gallons of water.

2. Balancing pH Level With Baking Soda (Sodium Bicarbonate)

Maintaining the correct pH level is crucial for water clarity and swimmer comfort. Baking soda, or sodium bicarbonate, serves as an effective pH increaser. It’s a cost-efficient way to balance your pool’s pH and prevent irritation to swimmers’ skin and eyes.

3. Adjusting pH With Muriatic Acid

On the other hand, if your pool’s pH is too high, muriatic acid can help you lower it. Just remember to handle it with care and follow proper safety precautions while using it.

4. Removing Metal Stains With Vitamin C

Removing Metal Stains in the pool With Vitamin C
Source: dengarden.com

Unsightly metal stains can mar the beauty of your pool. Vitamin C, in the form of ascorbic acid, can be a powerful ally against these stains. Simply crush vitamin C tablets and apply them directly to the stained areas to witness a remarkable difference.

5. Combatting Scaling With Vinegar or Citric Acid:

Calcium scaling can accumulate on pool surfaces over time. Vinegar or citric acid solutions can effectively break down these deposits and keep your pool looking pristine.

Part 2. How to Maintain a Pool Easily

1. Regular Skimming and Cleaning

Set a routine for skimming the pool’s surface and cleaning out debris from the skimmer baskets. This simple step goes a long way in maintaining water clarity.

2. Weekly Brushing and Vacuuming

Weekly Brushing and Vacuuming the pool to keep it pristine
Source: supremeheating.com.au

Brush the pool walls and floor to prevent algae growth and vacuum the pool weekly to remove any settled debris.

3. Monitor and Adjust Chemical Levels

Regularly test the pool water’s pH, chlorine, and alkalinity levels. Adjust as needed to ensure a safe and comfortable swimming environment.


Maintaining a clean and inviting pool doesn’t have to be complicated or expensive. By incorporating these DIY pool cleaner and maintenance tips, you can enjoy a sparkling pool year-round.

Remember, a well-maintained pool not only enhances your backyard but also ensures a refreshing and enjoyable swimming experience for everyone.

Read more about the best chemicals for cleaning spas and pools.