Erosion sometimes can be a real nightmare. Whether you are trying to have a beautiful lawn in front of your house, or you are trying to make your garden look good, erosion can cause you trouble. It really doesn’t matter if you have a small piece of land or you have an enormous property, erosion is something that you just need to deal with.
You need to guard against erosion because you never know how natural forces are going to influence your soil. The sun, the wind, the rain, and even the wildlife are some things that you can control, but you can control erosion, and you should control it. Hydroseeding can be the answer to all of your problems. Don’t let these things undo all of your hard work and undo all of the beauty you have created. Vegetation is something that can help you with erosion control and hydroseeding alongside with it.
In this article we are going to break down if hydroseeding is good for erosion control, and what that actually is. So if you are interested in learning more about hydroseeding and erosion control, keep reading this article.
What is Hydroseeding?
Also called hydro mulching, hydroseeding is a process of applying grass seed, fertilizer, hydromulch, and water in one liquefied application. Soil stabilizers and soil amendments can also be used if there is a need for them, depending on the area that is treated. This process can be successfully used for lawns and aswell for erosion control. This procedure is popular because it is very successful, but it is also very fast and easy to be done. Also compared to other procedures this one is cheaper.
Is Hydroseeding really good?
We can say that hydroseeding is good and it works well. The reason for that is that the seed is suspended in a nutrient-rich slurry, and the contact of the seed with the water triggers the germination cycle. The mulch layer is there to seal in the moisture, and that’s the main reason why the soil stays in one place.
Why is Hydroseeding good for Erosion Control?
One of the main reasons why hydroseeding is good for erosion control is because it’s fast, and it’s faster than any other method. It will take around 5 hours for one person with a good water source to do one acre, or even less.
Some conventional methods can consume a lot of time, and hydroseeding can be done in half that time. Another super-fast thing is the fact that slurry binds to the soil instantly and it provides a stabilizing effect in the area, which makes the seeds take root.
Traditional ways of sowing seeds and scattering seeds over a large area are problematic because the seeds are left completely exposed to all of the elements of erosion. Another popular way of doing thins is sodding, but this method is limited to planting grass and that’s very expensive. That’s when hydroseeding steps in.
Also when it comes to different techniques, for example, sodding, hydroseeding is again better because it can work with any seed that you want to plant. Depending on the conditions and the needs of the soil you need to protect from erosion you will choose the right seeds. You also have an option to use a mix of different seeds tailored to your needs and wishes.
If you want to learn which seeds you can use with this technique, Erizon can give you the answer to that. This method is extremely efficient and you can achieve a more uniform distribution of seeds compared to other techniques. That means that the final result will be a beautiful landscape.
It is important to notice that hydroseeding is safe and that it doesn’t have any hazardous side-effects, neither to men, animals or to the environment. Nothing that is used while hydroseeding is toxic and you don’t need to worry about your health, your children’s safety or the safety of your animals. Also, another important thing is that you won’t make a mess with it.
Price is something that is a deal-breaker for many people but with hydroseeding that’s not the case. Because it is a cost-effective option for erosion control, and everyone can afford it. What’s even better is that after the initial installation the maintenance requirements are not that big.
What’s the best time to do Hydroseeding?
If you want a super-fast effect you should do your hydroseeding in the summer, because the grass will germinate and grow really fast because of the heat. But if you want to use less water than you should do it in the spring or fall, because it requires less water than in the summer.
Benefits of this method
- Quick germination
- Better moisture retention
- Hillsides and narrow areas difficult or impossible to dry seed can be done easily
- No straw or netting that you need to remove
- Uniform application
- It holds soil in place better than dry seeding
- Water requirements are less than with sodding
- No weed seed
Where can Hydroseeding be used to Control Erosion?
You can use this method anywhere. There are a lot of reasons why erosion occurs and why some lands become barren and infertile. When the topsoil gets eroded from rain, wind and other natural forces the only good solution is to cover the affected area with grass that will then hold the soil and prevent future erosion. Hydroseeding is the best way to do it, and you can do it anywhere. It can be used in lawns, reservoirs, barren lands, riverbanks, and more.
When it comes to choosing the right way to do hydroseeding it is always the best to look for a credible company with professionals. If you find someone who is not competent for doing something like this you will just lose your money and your time, and no one wants that. We wish you luck in your fight with erosion and happy erosion control with the help of this incredible technique.